Articles
Products
Resources
About Camtronics
Stepper Motors
NEW Stepper Motors. Awesome performance.
August 9, 2008
The MCG stepper motors have been discontinued because they have changed their requirements and want a 100 piece minimum order. Therefore I have switched
manufacturers and now offer the H34280-4A which is a 640 oz in which a 4 wire motor. I can provide this motors as a 4 wire ofr 8 wire motor. It is a nema 34 with a .499"D shaft and run great. I used these on one of my control units that I build for an OEM. “
NEMA23
PART # TORQUE CURRENT SERIES PARALLEL PRICE SHAFTING
23H2100BM 495 OZ IN 3A $69 PLUS $6S/H dual 1/4"
23H2100B 495 OZ IN 3A $69 PLUS $6S/H dual 3/8"
23H286-20-8B 425 OZ IN 1.4A 2.8A $69 PLUS $6S/H dual 1/4"
23H276-30-8B 282 OZ IN 2.1A 4.2A $59 PLUS $6S/H dual 1/4"
23H256-21-8B 185 OZ IN 1.5A 3A $59 PLUS $6S/H dual 1/4"
23H251-24--8B 156 OZ IN 1.7A 3.4A $49 PLUS $6S/H dual 1/4"
NEMA 34
PART # TORQUE CURRENT SERIES PARALLEL PRICE SHAFTING
34H2160-62-8B 1810 OZ IN 4.4 8.8A $225 PLUS $12S/H dual 1/2"
34H2120-42-8B 1160 OZ IN 3 6A $169 PLUS $12S/H dual 1/2"
34H2160-60-4B 1200 OZ IN 6A $179 PLUS $12S/H dual 1/2"
34H2295-43-8B 906 OZ IN 3.05 6.1A $149 PLUS $12S/H dual 1/2"
34H280-45-4A 640 OZ IN 4.5 $120 PLUS $12S/H SINGLE 1/2"
34H260-42-8B 400 OZ IN 3A 6A $99 PLUS $6S/H dual 1/2"
34H260-60-8B 465OZ IN 6A $99 PLUS $6S/H dual 1/2"
© 2005 Camtronics, inc.
Site by: Digital Platinum
