Articles
Products
Resources
About Camtronics
Servo Components
G320/G340 CASE.
Servo amp 3 axis/4 axis cases are now available for $110. The case is made up of flat
panels that are machine to match the G320/G340 . The case is machined for all
required connectors, switches, amps and transformers used in construction of a awesome
servo system. Send email for a picture.
Here is a link to a video of this
system http://video.google.com/videoplay?docid=7960471897079203497
Email me for pricing of assembled and tested units
Servo kit
Items may be bought separately
G320.G340 case $110
4 module Heatsink $40
Db25 with screw terminals $30
Connector kit $30
3 G320 servo am
3 encoder cables $36
3 motor cables $36
Figure $38 s/h in
Power Supply (Email me. I do not want to sell power supply kits to unqualified people.)
110 primary 36VDC at 20A ideal for the 600 oz in Ametek motors and others.
G320 servo Amps $129 each
G320 SPECIFICATIONS:
Power Supply 18 to 80 VDC
Motor Current 0 to 20 Amps
Lock Range +/- 128 count following error
Feedback Quadrature TTL Encoder
Feedback Resolution X4 Encoder Line Count
Switching Frequency 25 kHz
Current Limit 0 to 20 Amp, Trimpot Adjustable
Analog PID Damping and Gain Trimpots
Step Pulse Frequency 0 to 250 kHz
Step Pulse "0" Time 0.5 Microseconds Min.
Step Pulse "1" Time 3.5 Microseconds Min.
Size 2.5" X 2.5" X 0.825"
Weight 3.6 oz weight
Encoder Supply +5VDC, 50 mA max
G340 servo Amp $149 each
G340 SPECIFICATIONS:
Power Supply 18 to 80 VDC
Motor Current 0 to 20 Amps
Lock Range +/- 128 count following error
Feedback Quadrature TTL Encoder
Feedback Resolution X4 Encoder Line Count
Switching Frequency 25 kHz
Current Limit 0 to 20 Amp, Trimpot Adjustable
Analog PID Damping and Gain Trimpots
Step Pulse Frequency 0 to 250 kHz
Step Pulse "0" Time 0.5 Microseconds Min.
Step Pulse "1" Time 3.5 Microseconds Min.
Multiplier Settings X1, X2, X4, X5 and X10
Size 2.5" X 2.5" X 0.825"
Weight 3.6 oz weight
Encoder Supply +5VDC, 50 mA max
DB25 junction board breakout box. This new board uses SCREW Terminals for pins 1 to 19. Each pin has a pull up resistor if required. A separate header is provided for those applications requiring +5. This should make connections to the 5A drivers and similar drivers easy. The db25 breakout box is pre wired with pins 1 to 19 running to screw terminals. Pins 20-25 are connected together and are used for ground terminals ( 5 provided). All screw terminals are marked on the board.Makes connections to Desknc for DOS, Desknc for windows, Maxnc, CNCPRO, Dancam and EMC easy.
Kit is $30 plus $5 s/h $9 overseas
© 2005 Camtronics, inc.
Site by: Digital Platinum
